Views: 0 Author: katreenipump Publish Time: 2023-03-25 Origin: Site
Characteristics of high-temperature resistant submersible pump
1. The high-temperature resistant submersible pump has an ultra-long service life,
no maintenance required, small size, high efficiency, and low power consumption.
2.The stator and circuit board of the motor are sealed with epoxy resin and completely blocked from the rotor,
which solves the water leakage problem caused by long-term diving of the motor type DC water pump.
It can be installed underwater and completely waterproof.
3.The shaft of the high-temperature resistant submersible pump uses high-performance ceramic shaft, with high accuracy and good wear resistance.
Due to the precise cooperation between the pump shaft sleeve and the ceramic shaft,
the noise is lower than 35 decibels, and the power is even lower than 30 decibels, which is almost silent.
4. The high-temperature resistant submersible pump has impeller rotor stuck maintenance,
reverse connection maintenance, overload maintenance, and over current maintenance.
5. The high-temperature resistant submersible pump is controlled as a soft starter with no impact and low power consumption.
6. There are no components inside the high-temperature submersible pump body, and then the pump body uses high-temperature resistant materials,
so that the pump can be used in boiling water for a long time.
7.The three-phase DC program controlled water pump is a unique and innovative product of our company,
with high technological content, high intelligence, and convenient control.
Thank you very much for your support to Dolay pump industry Co., Ltd!
The above is an introduction to the characteristics of high-temperature resistant submersible pumps.
If you want to further understand this question, or have questions about other pump industry products,
pump selection, pump model, and pump price, welcome your inquiries at any time.
ADD: NO.189 HENGSHI ROAD, HENGFENG INDUSTRY AREA, WENLING, TAIZHOU, ZHEJIANG PROVINCE,CHINA.