How To Install A Water Heater Circulating Pump

How To Install A Water Heater Circulating Pump

• Turn off the power supply of the electrical appliance and the water pressure of the main water heater

• Use the connection flange and pump provided by the provided in the horizontal position

• Most circulating pumps must run 24 every day, and a dedicated dual socket is required to provide a power supply

• The normal thermal water pipe circulating pump moves the hot water downward to the receiver

Installing a water heater circulating pump is a pump returned to the pipe connection. When it obtains a constant hot water, it is located in most faucet. The circulating pump must have a complete path, fully circulating the hot water heater to turn off the exit exit the faucet as much as possible. The hot water circulation pump is used in the bathroom sink, kitchen sink, shower and bathtub's faucet, which may need instant hot water.

1.Turn off the power supply of the electrical appliance and the water pressure of the main water heater: This may require the main water source of the valve to depend on the living conditions of the pipeline in their own. Cut into the hot water pipe from the water heater. You also need to cut in to promote the hot and cold water supply line of the water heater. The unidirectional valve will be placed on this pipe, so only the water heater flowing in cold water and the circulating hot water cannot flow out to the cold water line.

2. Use the connection flange and pump provided by the provided in the horizontal position: A plug -in plug -in parts provided by the bump pump manufacturer can be connected to the existing pipe with bolts with bolts. According to the diameter size of different hot water supply pipes, appropriate attachments are determined to be used for the pipeline of flange connection. Flange will have high temperature sealing or O -type circles for waterproof connection. Generally due to the small size of the pump, no additional water pipes other than support are required to ensure the unit.

3. Most circulating pumps must run 24 every day, and a dedicated dual socket is required to provide a power supply: cutting hot water is just the below faucet connection line to enter the sinking area. The closer to this union, the faster the hot water from the pump circuit. The water in this pipe will return to the cold water pipe of the re -heating water tank.

4. The normal thermal water pipe circulating pump moves the hot water downward to the receiver, but it must be the return path of the water: This is the return row to recycles the water heating heaters. The insulation of the thermal circulating pump circuit and the foam temperature preservation pipeline is important. The hot water will quickly loosen the heat exposed to the pipeline and be moved or distributed.