How to solve the problem of mechanical seal leakage?Reason一、 Failure to first fill the pump with water during trial operation；Start the pump to run without first supplying water to the mechanical seal from the external water supply；Water shortage during operation-Inspection method: Disassemble the p
How to prevent corrosion of submersible pumps?Controlling the corrosion of underground water on submersible pumps mainly involves two aspects:First, improve the corrosion resistance of pipes and use materials with good corrosion resistance.Second, remove or suppress some factors that cause corrosion
What are the hazards of submersible pump water hammer?Conditions for water hammer generation:1. Sudden opening or closing of the valve2. Sudden shutdown or startup of submersible pump unit3. Single pipe delivers water to high places (water supply terrain elevation difference exceeds 20m)4. Large tot
How can the flow rate of submersible pumps decrease?Reasons for flow decrease:1. The impeller or pump body fluid flow path is blocked by debrisTreatment method: Disassemble the submersible pump, remove debris from the impeller or pump body flow path, make the impeller rotate smoothly and quickly, an
What is the impact of different impellers on the water pump1. Runner type impellerThe runner impeller is a curved runner that flows from the inlet to the outlet. Because this impeller has excellent anti clogging performance.-Suitable for conveying liquids containing large particle impurities or long
Maintenance method of agricultural submersible pump in slack season1. Check vulnerable parts: the impeller, retaining ring, shaft sleeve, bearing seat, etc. of the submersible pump are vulnerable parts. First, remove the water pump and check whether the vulnerable parts are intact. It is forbidden t
Remedial method for water leakage of submersible pumpMost of the water leakage failures of submersible pumps are caused by aging and wear of sealing devices. In addition to replacing new sealing elements, the following simple methods can also be taken to remedy.1、 The sealing ring of the submersible
Preparation before use of submersible pump1. Check whether the cable is broken or broken. Before use, not only observe the appearance of the cable, but also use a multimeter or megohmmeter to check whether the cable is connected. There shall be no oil leakage at the cable outlet.2. Before the use of
Why do some submersible pumps need water before use?
Submersible pumps, as the name implies, are put in water to work. But when purchasing submersible pumps, some manufacturers will remind them to add water before starting.
If there is air inside the pump, air binding will occur after starting, that is, light can not absorb water.
Common sense of submersible pumpSubmersible pump is widely used in various industrial, agricultural and domestic water transmission.
Before using the submersible pump, we need to understand its relevant common sense to avoid unnecessary losses.