Reasons and solutions for the failure of the hot water circulation pump to discharge water1. The inlet and outlet valves of the hot water pump are not opened, the inlet and outlet pipelines are blocked, and the abortion impeller is blocked-Solution: Remove blockages2. Insufficient water supply at th
Points for attention when using frequency converters for submersible pumps
Frequency converters for submersible pumps
Good grounding is the basis for the stable and reliable operation of the inverter
Pay attention to the installation and use environment.
Install a reactor at the input end or reduce the carrier frequency.
How to determine the level of solar panels1. Look at the surface of tempered glassIn order to pursue production speed, small manufacturers often inadvertently drop silica gel on the surface of tempered glass, and the surface is equipped with silica gel panels to reduce power generation efficiency.2.
What is a submersible sewage pump?
The submersible sewage pump is a pump that can work directly in the liquid and has a wide range of applications,
including sewage treatment, urban water supply, industrial water treatment
the technical principle, structural character of submersible dirty water pump
Small Flow Deep Well Submersible pump
Performance parameters and prices of small flow deep well submersible pumps
Prices of small flow deep well submersible pumps
Rust prevention methods for water pumps1. Regularly check the mechanical sealing condition of submersible pumps (like sealing rings, refueling screws, sealing boxes), and promptly repair or replace worn and poorly sealed components.-Tighten any loose parts promptly-Replace with new parts in a timely
The submersible sewage pump is a pump that can work directly in the liquid
It has a wide range of applications, including sewage treatment, urban water supply, and industrial water treatment.
Application scenarios of submersible sewage pumps
Sewage treatment
City water supply
Industrial water treatment
Causes and troubleshooting methods of corrosion resistant submerged pumps1. Pump filling slowReason: There is a large gap between the front lining plate and the impeller, the water outlet pipe cannot seal the air, and the exhaust is full.Solution: Adjust the gap, adjust the water outlet pipeline, an