Advantages and disadvantages of horizontal centrifugal pumpsAdvantages of horizontal centrifugal pumps1. Compact structure and small footprint. Due to its horizontal layout design, horizontal centrifugal pumps do not require additional supports or foundations and can be placed directly on the ground
How to solve the wear and erosion of pulp pumps1. Choose wear-resistant materials: For the components of pulp pumps, especially the impeller, pump casing, and other parts, wear-resistant materials should be selected. Commonly used wear-resistant materials include high chromium alloy, rubber, ceramic
Causes of water pump impeller failure(1) It is very likely that the inlet water quality of the water pump is poor, and there are many impurities in the pump.(2) The filter screen of the faucet or the inlet horn is relatively close to or in the midst of sediment.(3) The medium pumped by the water pum
How to choose deep well submersible pumps Selection requirements of deep well submersible pumps, The Submersible Pump Produced by Dolay Pump Industry High Head and Large Flow Rate Sumersible Pumps
Precautions for the use of deep well submersible pumps (how to use deep well submersible pumps (QJ SERIES DEEP WELL PUMP) When selecting a submersible pump, pay special attention to the model, flow rate and head of the pump. When installing the submersible pump, the cable should be overhead Do not switch the motor on and off frequently
What are the reasons for the insufficient water output of centrifugal water pumps?1. Due to the formation of vortices in the water pool, the self priming centrifugal pump sucks air into the pump body, resulting in insufficient water output of the pump. This phenomenon can increase the submergence de
Structural Description of Geothermal Submersible Pump Deep well submersible pump, Water-lifting tool that is directly connected to a motor Water pump and submerges into water to work.
Reasons and solutions for the failure of the hot water circulation pump to discharge water1. The inlet and outlet valves of the hot water pump are not opened, the inlet and outlet pipelines are blocked, and the abortion impeller is blocked-Solution: Remove blockages2. Insufficient water supply at th